To create a new face, click "Add tariff" in the upper right corner.
Fill in the fields and click "Save". The mandatory fields will be marked with a yellow exclamation mark.
Let's list all the tariff parameters with a few explanations:
(Example: The trip costs 800 rubles per hour. The field "Time unit" indicates the time interval in minutes - 60 minutes. The field "Cost of a unit of time" indicates the cost of an hour - 800 rubles.).
The time calculation in the tariff can be used both together with the cost of a kilometer, and instead of it. Leave 0 if time-based calculation is not needed.
9.Do not count the first units of time. This is the number of free time units from the start of the trip (similar to the "Do not count the first kilometers" function, here you can specify what time at the beginning of the trip will be free for the client).
Unit of time. The interval in minutes for which the cost is defined in the "Cost of time unit" field.
Additional coefficient in percent. With this indicator, the total cost of the trip will be increased.
Cost for a minute stop. The driver can turn on the pause-mode after the start of the trip, if it was necessary to stop en route.
Don't count the first minutes of stop. Here you can specify how many first minutes of stop will be free for the customer.
Boarding. This is the amount from which the trip starts.
Free waiting time (min). Waiting for the customer starts after the driver has pressed the "In the seat" button (the customer was notified that the car has arrived) and lasts until the driver has pressed the "Start" button (the customer has sat down) in the car, the trip began). In the "Free waiting time" field, you can specify how many first minutes of waiting will be free for the client.
Do not confuse waiting with parking - parking can only be enabled after the start of the trip.
The countdown on the taximeter will start immediately if the setting is active"Automatically validate ON-SITE", otherwise, only after the call back that the car drove up.
** Paid waiting (cost for a minute stop).**
Stop threshold (km/h). This is the speed below which the taxi meter will activate. When the car decelerates below this speed threshold, the driver has the option to press the "pause" button. You can also enable pausing automatically (activate the checkbox "Automatically enable pausing"). If this speed threshold is exceeded, pausing is disabled. The optimal value, taking into account the error of the GPS signal, is 5-6 km/h.
Traffic light pause(in second). This is a pause that is activated when the car slows down to the parking threshold. This time is always free for the client. After a traffic light pause, if the car continues to stand, the parking countdown begins.
Here it is reasonable to indicate the average time - how long the traffic lights are on in your city (for example, 5-10 seconds).
Round up to. The final trip amount will be rounded up to this figure (1,5,10).
Round up - you can always round down, always up, or according to the rules of arithmetic.
Service. This field is optional. You can select a service if you want this rate to be valid only for this service and not for any others.
The field must be left blank if the tariff should be valid for all services.
The cost of the first kilometers. Here you can specify price changes step by step depending on the kilometers travelled.
Example: from the beginning of the trip (from 0 km) - the fare is 10 rubles / km. From the 5th kilometer - the cost is 12 rubles / km. From the 10th kilometer - the cost is 15 rubles / km.
You can add each new step by clicking on the "+" button.
When using this function, the fields "Kilometer cost" and "Kilometer cost (second)" will not be taken into account.
Hidden tariff. If this option is activated, only the dispatcher can set this tariff. The driver will not be able to select this fare on his terminal manually if he wants to change the fare or start the taximeter for self-ordering.
Enable parking automatically. When this option is enabled, the parking meter will turn on automatically as soon as the speed falls below the parking threshold. The parking meter automatically turns off at speeds above the parking threshold at any setting.
Round the price immediately. When this option is activated, the price on the taximeter is rounded in real time (up to the figure that you specified in the "Round to" field). If the option is not enabled, the final amount of the trip is rounded up only after the taximeter has stopped.
Show minimum wage. Until the amount on the taximeter exceeds the minimum wage, the minimum wage will be displayed on the screen.
Region. The tariff will be valid only in the designated zone (region). The tariff validity region itself is drawn in the "Tariff validity regions" section. This function is used to create a changeover from city to country tariff. How to set up switching, see the section - Tariff regions.The option works on calculation types: Taximeter and Preliminary cost calculation.
28.Switches to. Here you can configure tariff switching to another tariff by time periods. For example, you want the daytime rate to change to the nighttime rate automatically at night. Similarly, you can switch to the weekend tariff, holiday tariff, New Year's Eve, etc. You can set up your own tariff in the "Settings / Time periods" section. For more information, see Setting Time Periods
Tariff settings video in our video presentation:
https://youtu.be/XtHpxIIDrmY?t=604
In the "Tariffs/Fare Schedules" section, you can define a fixed fare for each area of your city. How to designate districts, see the section Addresses/Regions.
First you need to create a tariff scale for your service, after adding the finished grid will appear in the tab to the left.
!Attention - by default, the creation of a tariff scale opens, if you create an already created tariff scale again, it will erase your prices that were indicated earlier. You must immediately switch to the desired tariff scale, if it has already been created!
Then indicate in the table the prices that will apply within each area, as well as when traveling from one area to another.
When creating an order, it is important to enter the starting and ending address of the trip correctly. The program will determine in which area each address is located and will substitute the price from the fare grid.
Below, in the field "Price by period" you can switch by periods of time. For example, the markup for the night period, holidays, weekends, etc. To do this, you must select the desired time period and enter the markups in the table. If necessary, you can change all values in the table at the same time using the "Change all values to" field.
For more information on how to create a time period, see Setting time periods
This section is used to create a switch from city fare to out-of-town fare. The option works on the type of calculation: Taximeter and Pre-calculation of cost.
Let's look at an example of how to configure the interaction of city and out-of-town tariffs:
При выезде машины за границы региона "Город" таксометр будет автоматически переключаться на Загородный тариф.
В этот момент для расчета стоимости поездки есть 2 варианта:
Трансфер - это услуга с фиксированной стоимостью поездки.
Можно создать такую услугу в виде встречи или проводов:
Например, встреча из Аэропорта (цена не зависит от того, какой конечный адрес поездки), либо проводы - поездка в Аэропорт.
Или же создать поездку из одной точки в другую:
Диспетчер может установить трансфер при создании заказа в разделе "Дополнительно".
Дополнительные услуги - это платные услуги, которые можно добавить к поездке (например, трезвый водитель, услуга погрузки, кондиционер и пр.).
В разделе "Тарифы/Дополнительные услуги" нажмите кнопку "Добавить услугу" в правом верхнем углу.
Заполните поля:
В этом разделе вы можете создать скидку для выборочной группы клиентов.
При создании дисконта нужно выбрать "Тип скидки": в процентах или фиксированная. В поле "Скидка" указать значение скидки.
Помимо этого можно создать бонусную бесплатную поездку для клиента - в поле "Бесплатная поездка" нужно указать значение N, какая по счету поездка будет бесплатной (Каждая N-ая поездка будет бесплатной для клиента).
После того, как вы создали дисконт, нужно создать для него дисконтные карты, которые Вы можете присвоить клиентам. Для этого перейдите в следующий раздел - Дисконтные карты.
Дисконтные карты могут быть присвоены выбранным Вами клиентам. При создании заказа клиент должен сообщить диспетчеру свой номер карты для получения скидки. Также можно привязать карту к конкретному номеру телефона клиента, чтобы дисконт применялся автоматически.
Для создания карты заполните следующие поля: